The essential kit to fit a stove to your tent.
This flashing kit allows you to cut a hole in your tent to use your stove safely.
Our flashing kit is made from vulcanized rubber and can be used at temperatures up to 300 degrees, and is available in two sizes, depending on your needs. Each kit comes complete with one silicone cone, two metal rings with pre-drilled bolt holes, six nuts with locking bolt and twelve metal washers.
Ideal for stoves with a larger flue, from three to six inches.
The silicone is very flexible so can be used at an angle of 0-45º. We also sell a 45º Flashing Kit here
A simple to use, DIY kit if you want to use a stove within your tent.
Can be used with a wide range of canvas tents and incredibly simple to install.
- Small: 3”
- Large: 3” | 3 3/4” | 4 1/2” | 5 1/4” | 5 3/4” | 6 1/4”
Heatproof orange silicone collar, two attached stainless steel metal rings, 6 Stainless steel bolts, locking nuts and washers
Cut along the marked hole line in the top of the silicone to suite the diameter of your flue pipe. Fit to the required place on your tent by sandwiching the silicone between the rings and install the bolts. Insert the flue pipe through the silicone and you're ready to go.